[Free] 2019(Nov) EnsurePass Palo Alto Networks PCNSE Dumps with VCE and PDF 201-210

Get Full Version of the Examhttp://www.EnsurePass.com/PCNSE.html Question No.201A network security engineer has a requirement to allow an external server to access an internal web server. The internal web server must also initiate connections with the external server. What can be done to simplify the NAT policy?Configure ECMP to handle matching NAT trafficConfigure a NAT Policy rule with Dynamic IP and PortCreate a new Source NAT Policy rule that matches the existingtraffic and enable the Bi-directional Read more [...]

[Free] 2019(Nov) EnsurePass Palo Alto Networks PCNSE Dumps with VCE and PDF 211-220

Get Full Version of the Examhttp://www.EnsurePass.com/PCNSE.html Question No.211What are two prerequisites for configuring a pair of Palo Alto Networks firewalls in an active/passive High Availability (HA) pair? (Choose two.)Thefirewalls must have the same set of licenses.The management interfaces must to be on the same network.The peer HA1 IP address must be the same on both firewalls.HA1 should be connected to HA1. Either directly or with an intermediate Layer 2 device.Correct Answer: AD Question Read more [...]

[Free] 2019(Nov) EnsurePass Palo Alto Networks PCNSE Dumps with VCE and PDF 221-230

Get Full Version of the Examhttp://www.EnsurePass.com/PCNSE.html Question No.221A host attached toEthernet 1/4 cannot ping the default gateway. The widget on the dashboard shows Ethernet 1/1 and Ethernet 1/4 to be green. The IP address of Ethernet 1/1 is 192.168.1.7 and the IP address of Ethernet 1/4 is 10.1.1.7. The default gateway is attached to Ethernet 1/1. A default route is properly configured. What can be the cause of this problem?No Zone has been configured on Ethernet 1/4.Interface Ethernet Read more [...]

[Free] 2019(Nov) EnsurePass Palo Alto Networks PCNSE Dumps with VCE and PDF 171-180

Get Full Version of the Examhttp://www.EnsurePass.com/PCNSE.html Question No.171The company#39;s Panorama server (IP 10.10.10.5) is not able to manage a firewall that was recently deployed.The firewall#39;s dedicated management port is being used to connect to the management network. Which two commands may be used to troubleshoot this issue from the CLI of the new firewall? (Choose two)test panoramas-connect 10.10.10.5showpanoramas-statusshow arp all I match 10.10.10.5topdump filter quot;host Read more [...]

[Free] 2019(Nov) EnsurePass Palo Alto Networks PCNSE Dumps with VCE and PDF 181-190

Get Full Version of the Examhttp://www.EnsurePass.com/PCNSE.html Question No.181What must be used in Security Policy Rule that contain addresses where NAT policy applies?Pre-NAT addresse and Pre-NAT zonesPost-NAT addresse and Post-Nat zonesPre-NAT addresse and Post-Nat zonesPost-Nat addresses and Pre-NAT zonesCorrect Answer: C Question No.182Support for which authentication method was added in PAN-OS 8.0?RADIUSLDAPDiameterTACACS Correct Answer: DExplanation:https://www.paloaltonetworks.com/resources/datasheets/whats-new-in-pan-os-7-1 Question Read more [...]

[Free] 2019(Nov) EnsurePass Palo Alto Networks PCNSE Dumps with VCE and PDF 191-200

Get Full Version of the Examhttp://www.EnsurePass.com/PCNSE.html Question No.191The web server is configured to listen for HTTP traffic on port 8080. The clients access the web server using the IPaddress 1.1.1.100 on TCP Port 80. The destination NAT rule is configured to translate both IP address and report to 10.1.1.100 on TCP Port 8080. Which NAT and security rules must be configured on the firewall? (Choose two)A security policy with asource of any from untrust-I3 Zone to a destination of 10.1.1.100 Read more [...]